Voice Alarm Dialer with 8 Input Announcement System

Viking K-2000-DVA Multi-Input Voice Alarm Dialer & Store Caster

The K-2000-DVA is a fully programmable, multi-input, multi-number auto dialer and digital announcer, ideal for emergency and non-emergency notifications. It features eight dry contact inputs, each capable of dialing up to eight 32-digit phone numbers and playing a unique message up to one minute long. Total recording time for all eight inputs is eight minutes. The K-2000-DVA supports call progress detection with normal/fast busy, call pickup, CPC, and ring-no-answer detection when used as an alarm dialer. Alternatively, it can operate as a store caster for on-site announcements without dialing. Programming can be performed via Touch Tone phone or through a PC using the RS-232 port and Viking software.

• Alarm dialer for security, burglar, or fire alarm notifications
• System alarm or equipment malfunction alerts
• Environmental warning notifications
• Automatic telephone messaging and on-site announcements (store caster)

• Non-volatile memory (no batteries required)
• Stores up to 64 phone numbers (8 inputs × 8 numbers each, 32 digits per number)
• Eight minutes total message recording time (1 minute per input)
• Programmable message repeat and lap counters
• Eight inputs programmable as normally open or normally closed, enabled or disabled
• Programmable ring delay, qualifier timers, and resume timers per input
• Call progress detection with ringback limit
• Remote security and access codes
• Store caster mode for on-site announcements
• Local or remote programming and recording
• RS-232 port for PC programming
• Made in the USA, 1-year warranty

• Power: 120V AC / 12V DC, 500 mA, UL-listed adapter included
• Dimensions: 211 × 160 × 46 mm (8.3” × 6.3” × 1.8”)
• Shipping Weight: 1.02 kg (2.25 lbs)
• Operating Environment: 0°C to 32°C (32°F to 90°F), 5%-95% non-condensing humidity
• Talk Battery: 12V DC
• Touch Tone Dialing: 120 ms on/off, 50 ms on/off
• CPC Detection Time: 320 ms minimum
• Message Record Time: 8 minutes total
• Sampling Rate: 64 K (equivalent)
• Input Detection Time: 80 ms (with Qualifier Timer), resolution 1 second, maximum 18 hours
• Connections:
  • (1) RJ11 jack for telco connection
  • (1) 3.5mm jack for 600-ohm audio output
  • (1) 9-pin RS-232 for PC connection
  • (1) 12-position screw terminal block for inputs