Hot-Line Phone with Built-in Keypad

The K-1900-8 panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard (dumb) phone. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls. The K-1900-8 housing consists of a heavy gauge stainless steel panel, a metal Touch Tone keypad, an armored cable, a heavy duty handset, and an all metal cradle. The K-1900-8 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory For outdoor or harsh environments, the K-1900-8-EWP is available with Enhanced Weather Protection (EWP). The EWP version includes faceplate, transmitter and receiver gaskets, hand soldered silicon sealed connections, gel-filled butt connectors, as well as a urethane potted circuit board with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming.

• Catalog sales
• Kiosks
• Courtesy and customer service phones
• Automated tellers (ATM’s)
• Hot-line reservation phones
• Security and emergency phones
• Replaces leased ringdown circuits
• Gate/entrance communication in noisy locations (diesel trucks, factory noise, etc.)

• Auto dials 1 (up to 32 digits) programmable speed dial number
• Multi-number dialer mode adds 5 (up to 16 digits) speed dial numbers
• Touch Tone or pulse dialing
• Touch Tone keypad
• Non-volatile memory (no batteries required)
• Operates on analog PABX and key system extensions or
analog Centrex and C.O. lines
• Programmable 6 digit security code
• Touch Tone programmable
• Vandal resistant features: 1/8” thick stainless steel panel, armored cable, metal cradle and sealed metal keypad Programmable pre-dial pause
• Blocks fraudulent calls from hand held pocket dialers Limited toll restriction in dumb phone mode
• Hearing aid compatible amplified handset with sealed push button volume control
• Optional Enhanced Weather Protection (EWP)

• Power: Telephone line powered (20V DC/18mA minimum)
• Dimensions: Overall - 127mm x 254mm x 102mm (5” x 10” x
4”)
• Shipping Weight: 1.8 kg ( 4 lbs.)
• Operating Temperature: 0°C to 32°C (32°F to 90°F)
• Humidity: Standard - 5% to 95% non-condensing EWP - Up to 100% condensing
• Panel Material: .125 inch thick stainless steel
• Handset Cable Length: Standard K-1900-8 - 86cm (34”) K-1900-8-EWP - 137cm (54”)
• Mounting: Flush mount or surface mount with optional VE-5x10
• Dial Speed: Touch Tone - Normal = 120ms on/off, Fast = 50ms on/off; Pulse - Normal = 10 pps, Fast = 20 pps Connections: (2) gel-filled butt connectors