andsfree Weather-Resistant Speaker Phone

The K-1705-3 is a rugged and stylish hands-free phone designed for apartments, residential doors/gates, or any application requiring a vandal-resistant speakerphone with a built-in color CCTV camera. When the “Call” button is pressed, the K-1705-3 provides a dial tone. The keypad can then be used to dial any number. The phone will automatically disconnect if no touch tone is entered within 8 seconds, a busy signal is detected, CPC is detected, or the programmable maximum call time is reached. Manual disconnect is also possible by pressing the “Call” button again. The K-1705-3 includes a high-resolution color video camera, microphone and speaker volume controls, selectable auto-answer for monitoring, a yellow “In-Use” LED, and comes with a standard flush mount rough-in box. An optional VE-6x7 weather-resistant surface mount box is also available. For extreme outdoor environments or corrosive atmospheres, the K-1705-3 can be equipped with Enhanced Weather Protection (EWP), which includes rubber gaskets and boots, closed-cell foam gasketing, hand-soldered silicon-sealed connections, anti-corrosive gel-filled butt connectors, and urethane-encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches.

• Apartment entry phone when used with the K-1900-3 Apartment Entry Dialer, C-4000 Apartment/Office Entry Controller, or C-3000 Apartment Entry Controller
• Residential gate or door entry phone when used with the C-2000A Door Entry Controller
• Courtesy or customer assistance phone
• Automated Teller (ATM) phone
• Security or emergency phone
• Hot-Line phone when used with the K-1900-5 Hot-Line Dialer Note: Line-powered phones on low-voltage or low-loop current systems may require a TBB-1A Talk Battery Booster (Fax Back #630)
• Kiosk phone with 100-number speed dialing when used with the K-1900-9 Multi-Number Dialer

• Built-in high-resolution color video camera with wide viewing angle, tilt/swivel adjustments, and operating temperatures from -30°F to 150°F
• Audio and video transmission over a single CAT5E cable
• Vandal-resistant: 14-gauge louvered stainless steel faceplate, stainless steel speaker/mic screen, heavy-duty metal keypad and “Call” button, impact- and scratch-resistant camera lens, hex-drive mounting screws
• Weather-resistant: Mylar speaker, faceplate gasket, mic and speaker gaskets, internally sealed (IP67) push button switch and keypad, sealed camera lens, potted camera circuit board, stainless steel mounting hardware
• Optional Enhanced Weather Protection (EWP) meets NEMA standards
• Yellow “In-Use” LED indicator
• Volume controls for microphone and speaker
• Advanced call progress detection: auto-disconnect on busy signal, CPC reorder tone, return to dial tone, max call time, and selectable silence timeout
• Selectable auto-answer for monitoring
• Push-button disconnect option
• Zinc-plated steel rough-in box with (2) 3/4” conduit knockouts
• Optional VE-6x7 surface mount box
• Selectable maximum call time
• Selectable VOX switching speed

• Power: Telephone line powered, 20V DC / 20mA minimum
• Dimensions: Overall – 140mm x 165mm x 66mm (5.5” x 6.5” x 2.6”), Rough-in box – 114mm x 140mm x 64mm (4.5” x 5.5” x 2.5”)
• Shipping Weight: 1.6 kg (3.5 lbs)
• Speaker Volume: Approx. 70 dB max @ 1m
• Ring Voltage: 25V AC RMS minimum (for auto-answer)
• CPC Disconnect Time: 500ms minimum
• REN #: 0.5 A
• Regulated Power: 5–9V DC, 150mA (6V DC adapter included)
• Image Sensor: 1/4” color CMOS
• Video Output: 1 VP-P composite, NTSC, 75Ω
• Resolution: 420 lines (640 x 480 @ 30fps / 307,200 pixels)
• Sensitivity: 0.26 LUX (20 IRE), F2.0
• Lens: 3.4mm pinhole, 70° FOV (Field of View)
• Tilt/Swivel Adjustment: Vertical ±20°, Horizontal ±30°
• Maximum Wire Run: 1000 ft (RG59/RG6 for video, CAT5 for power/audio), 150 ft (CAT5E for video, power, audio)
• (5) Gel-filled butt connectors (3M Scotchlok UR2)