Proximity Card Entry Phone – Secure Building Access

The Viking E-70 Series entry phones are compact, weather and vandal resistant handsfree speaker phones that provide two-way audio communication. Each E-70 includes a built-in 125KHz HID-compatible proximity card reader that outputs standard 26-bit Wiegand data, compatible with Viking ES-1 controllers or any 26-bit Wiegand system. The compact design allows flush mounting in a standard double gang electrical box. Available in five attractive finishes, replacement PNL-70 faceplates are also available.

• Door or gate communication, business delivery entrances
• Use with Viking C-200 or C-250 to control a single E-70 on one phone line
• Use with Viking C-2000B to control 1–4 E-70 units with door/gate control on a single line
• Use with Viking ES-1 for proximity card reader door control
• Front and back door chimes and paging with Viking SLP-1/SLP-4 and C-2000B
• Residential, commercial, and industrial door security
• Automatic speed dialing via Viking K-1900-5 or K-1900-30 on telephone lines or analog PABX/KSU ports
• Compatible with any analog PABX station port with programmable ringdown capability

• Built-in 125KHz HID 26-bit Wiegand proximity card reader with LED and beep confirmation; EWP board protection
• Audio and video transmission over a single CAT5E cable
• Compact size: front panel fits typical double gang wall plate
• Mounting: Flush mounts in double gang box (2.25” x 3.65” x 2.84” min) or surface mounts with VE-5x5 or VE-GNP Gooseneck Pedestal (EWP recommended)
• Five standard finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Polished Brass, Satin Black, Satin White
• Replacement PNL-70 faceplates available in all finishes
• Vandal resistant: 16 gauge polished brass or 18 gauge 304 stainless steel faceplate, 316 stainless steel push button, stainless steel speaker screen, scratch-resistant powder coating, hex drive screws
• Weather resistant: Mylar speaker, faceplate gasket, mic/speaker gasket, IP67 push button, self-draining mic mount, UV-stable powder coating (excluding E-70-SS)
• EWP model meets IP66 ingress protection rating
• Blue LED indicates push button, ringing, and off-hook
• Programmable intelligent call progress detection for auto hang-up on CPC, silence, busy signal, or timeout; selectable auto-answer for monitoring
• Optional VE-LIGHT faceplate illumination kit for VE-5x5 mounting

• Power: Telephone line powered, minimum 18V DC / 20mA; TBB-1B Talk Battery Booster recommended for low-current lines
• Faceplate Dimensions: 123.8mm x 125.4mm x 4.3mm (4.875” x 4.938” x 0.17”)
• Phone Dimensions: 72mm x 46mm x 42mm (2.84” x 1.8” x 1.65”)
• Shipping Weight: 0.55 kg (1.2 lbs)
• Speaker Volume: ~62 dB maximum @ 1m
• Ring Voltage: 25V AC RMS minimum (auto answer)
• CPC Disconnect Time: 300 ms minimum
• REN: 0.8A
• Operating Temperature: -34°C to 65°C (-30°F to 150°F)
• Humidity: Standard: 5–95% non-condensing; EWP: up to 100%
• Connections: (5) gel-filled butt connectors (3M Scotchlok UR2)
• Flush Mount Box: Double gang, min. 2.25” x 3.65” x 2.84” (Carlon BH234R or equivalent)
• Surface Mount Box: Viking VE-5x5 (DOD# 424)

• Power: 5–14V DC @ 60mA max
• Maximum Cable Length: 500 ft (24 AWG stranded shielded, Belden 9537)
• Frequency: 125KHz
• Format: 26-bit Wiegand
• Read Range: 1.25”–2.0”
• Credential Compatibility: HID ProxCard II, ISOProx II, ProxTag II, Pyramid Series Cards/Tags (PSC-1, PSI-4, PSM-2, PSK-3)
• Transducer: Beeps during card read
• LED: Red, turns off during card read
• Humidity: Up to 100% (fully potted EWP)
• Operating Temperature: -34°C to 65°C (-30°F to 150°F)