VikingSpeaker Phone with Push To Talk Button

VikingSpeaker Phone with Push To Talk Button

Item# viking-e-30-pt-
Regular price:
Sale price:
Price Match Request



The E-30-PT is designed to provide quick and reliable communication in noisier areas. The mic sensitivity is set to a low level until the TALK button is pressed then it is raised to a normal level. In this way, the E- 30-PT assures that the called party’s voice will be broadcast over the speaker. In applications where the background noise can be louder than the person calling, a handset type phone is recommended. The E-30-PT features non-volatile memory, a built in dialer, and intelligent call progress detection for automatic hang-up when the call is completed. The E-30-PT can be programmed to dial up to 5 different numbers on ring no answer or busy and can be configured to dial these numbers until answered. The E-30-PT-EWP shares all of the features of the E-30-PT in addition to Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets and boots, silicon sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming.

  • Non-ADA Hot-Line Phones for:
  • -Terminals Stadiums
  • -Parking lots/ramps
  • -Convention centers
  • -ATM machines
  • Gate and Door Entry Phones for:
  • -Business lobbies
  • -Vehicular and pedestrian gates
  • -Residences

Key Feature
  • Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, speaker/ mic screen, heavy duty metal keypad and “Call” button and hex drive mounting screws
  • Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and and push button switch. Switch internally sealed per IP67.
  • Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets. Weather resistant powder paint on optional VE-5x5 (DOD# 424).
  • E-30-PT-EWP is designed to meet IP66 Ingress Protection Rating (see DOD# 859 for more information)
  • Push to talk button
  • Telephone line powered
  • Non-volatile memory (no batteries required) Programmable to dial up to 5 numbers on busy or ring no answer
  • Red off-hook LED indicator
  • Vollume adjustments for microphone and speaker
  • Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC, reorder tone, maximum call time out and programmable silence time out
  • Selectable auto-answer feature for monitoring Selectable push button disconnect
  • Extended temperature range (-15°F to 130°F)
  • Flush mountable using included plastic rough-in box Optional VE-5x5 surface mount back box (DOD# 424)

  • Power: Telephone line powered. Minimum 24V DC talk battery voltage, with a minimum loop current of 20mA loop (room temp), or 25mA (extended cold temp range).
  • Loop current may be boosted on low current lines with a Viking Model TBB-1B talk battery booster (DOD# 632).
  • Minimum Ring Voltage: 90VAC RMS
  • Dimensions: Overall-127mm x 127mm x 57mm (5” x 5” x 2.25”), Plastic Electrical Box-102mm x 102mm x 54mm (4” x 4” x 2.12”)
  • Shipping Weight: 1 Kg (2.2 lbs)
  • Operating Temperature: -26°C to 54°C (-15°F to 130°F)
  • Humidity - E-30-PT: 5% to 95% non-condensing
  • Humidity - E-30-PT-EWP: Up to 100% condensing
  • Connections - E-30-PT: RJ11 jack
  • Connections - E-30-PT-EWP: Gel-filled butt connectors
Scroll to top