Extend Your Phone Systemís Features and Forward Calls to Telecommuters

Extend Your Phone Systemís Features and Forward Calls to Telecommuters

Extend Your Phone Systemís Features and Forward Calls to Telecommuters

The RAD-AMP extends the usefulness of your phone system to remote employees, as well as providing call forwarding to remote employees or locations. As a line extender, the RAD-AMP provides authorized users remote access to PABX, Centrex or Electronic Key system features As a call diverter, the RAD-AMP provides call forwarding from one location to another. After detecting an inbound call, the RAD-AMP accesses a second phone line, dials a preprogrammed Touch Tone number, and then bridges the two lines. As a Telecommuting extender, the RAD-AMP gives remote workers access to most PABX/KSU features from their home or cell phone. The home based employee hears a special tone when answering and has the option of taking the work related call. Remote call center personnel can "Log-In" and Log-Out" or change their forwarding number as their location changes. Using Touch Tones, remote workers can use phone system features to transfer the call to another extension or voice mail, start a conference call, generate a page or any other feature available to an analog PABX/KSU extension. For "Data" applications, the RAD-1 is required

Applications

  • Line Extender

  • Bridge calling zones

  • Utilize inexpensive WATS, FX or TIE lines

  • Remotely access paging amplifiers (PA-2A, HF-3W) or service observers (SO-24A)

  • Remote audio monitoring of radio or church programs and security sites

  • Call Diverter

  • Forward calls to voice mail or dictation equipment

  • Eliminate C.O. "Call forwarding" charges

  • Forward after hours calls to "on call" employees or answering services

  • Telecommuting Extender

  • Home based call center personnel

  • Outside sales staff

  • Traveling executives and personnel

Features
  • Standard Features

  • Improved audio amplifier

  • Programmable 6 digit security code

  • Programmable ring delay

  • Remote night switch

  • Disconnects on CPC, busy, return dial tone, maximum call time or by dialing #7

  • Non-volatile memory (no batteries required)

  • Auxiliary dry contacts

  • Programmable 15 second to 49.5 minute call timer

  • Compatible with analog stations on PABX and KSU systems

  • Simple programmable toll restriction

  • Line Extender

  • Access code(s)

  • 500 ms hook switch flash command

  • 2 second disconnect command

  • Call Dverter

  • 32 digit phone number memory

  • Telecommuting Extender

  • Log-In and Log-Out capability

  • Special tone notifies of work related calls

  • Supports PABX/KSU features (transfers, voicemail, paging, etc.) to remote employees

Specifications
  • Power: 120VAC/13.8VAC 1.25A UL listed adapter provided

  • Dimensions: 133mm x 130mm x 38mm (5.25" x 5.1" x 1.5")

  • Shipping Weight: 1.0 Kg (2 lbs 3 oz.)

  • Environmental: 0įC to 32įC (32įF to 90įF) with 5% to 95% non-condensing humidity

  • Connections: (2) RJ11 modular jacks

  • Amplification: Factory set to 3dB of audio gain

Scroll to top