Advanced Door/Gate Entry Phone Controller

Advanced Door/Gate Entry Phone Controller

The C-2000B allows single line phones or hone systems to share a phone line with 1-4 entry phones. Tenants may answer an entry phone call, converse with the visitor and activate a contact closure to control electronic gates or door strikes. The C-2000B provides entry phone “Caller ID” and will also provide “Call Waiting Caller ID” and a “Call Waiting” tone when the phone line is in use. Tenants may gain entry at each gate by entering a touch tone keyless entry code. Tenants may call out to each entry phone for monitoring purposes. An auxiliary input is also available for connecting a lighted doorbell switch, a common garage door opener/ receiver or an auxiliary keyless entry keypad.

• Add one to four entry phones to your standard home or office phones to provide:
• - Door communication - Door entry
• - Gate entry
• - Keyless entry

• Provide commercial or residential security via two-way handsfree communication at the door and gate
• Connects in series with a single phone line or to a phone system’s unused line input (loop start trunk input)
• Allows 1-4 entry phones to share a single telephone line with a residential or business telephone system
• Compatible with the following Viking entry phones:
• - E-10A, E-20B, E-30, E-35, E-40, E-50, E-60 Phones
• - K-1500-7 Stainless Steel Panel Phone
• - K-1700-3 and K-1705-3 Phone with Keypad
• - K-1900-8 Stainless Steel Panel Phone with Keypad
• - Or use with any analog touch tone phone
• Provide entry phone activated chimes and whole house paging when used with an SLP-1 or SLP-4
• Up to 6 different keyless entry codes / “one time use” keyless entry codes per entrance
• Up to 6 master keyless entry codes for use at any entrance
• Analog station mode allows the C-2000B to connect to an unused PABX station port
• Optional “Privacy Number” allows only selected visitors to call from an entry phone
• Provides “Caller ID” and “Call Waiting Caller ID” Produces “Call Waiting” tones
• Lighted doorbell switch input to activate entry phone call
• One set of normally open and normally closed contacts available for each entry phone
• Programmable contact activation time
• Auxiliary input to activate timed auxiliary contacts

• Power: 120VAC / 13.8VAC 1.25A, UL listed adapter provided Dimensions: 210mm x 159mm x 45mm (8.25" x 6.25" x 1.75") Shipping weight: 1.5kg (3.2 lbs.)
• Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
• Relay Contacts: 5A @ 30VDC/250VAC
• Ring Output: 8 REN, capable of ringing (16) 0.5 REN phones
• Talk Battery: 40V DC
• REN: 0.1A
• Connections: (30) cage clamp screw terminals